The Open-Mesh Ethernet Enclosure for OM2P-HS and OM5P-AC access points allows you to replace any single-gang data port with a secure access point, while retaining an Ethernet passthrough for voice/IP Phones, etc. The result is a professional, functional and secure installation, with the access point completely hidden inside, powered by passive (non-802.3af) POE. See our "Power and POE" page for more information on our 8 and 12-port POE options.
The second Ethernet port is fed by the OM5P-AC / OM2P-HS access point which can either be bridged with the LAN or run through the captive portal / NAT. This gives you the option of providing the wireless captive portal on the wired port, with its associated splash page and shaping rules.
To install, simply mount the backing plate to the single-gang box (replacing the cover), attach the enclosed cable adapters, clip the access point into place and close the cover. If you have a second data port or phone line, snap the cable into the enclosure. If not, snap in an enclosed blank plug. To open, simply insert and remove the enclosed key. Watch the video below for a detailed look.