Tycon Power Systems Gigabit TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC (Ubiquiti NanoBeam, PowerBeam, NanoStations, Rockets AC and MikroTik radios and routers) Power Over Ethernet voltage from a 36v to 72V battery system. They have an integrated POE injector to apply the 24VDC to the CAT6 Gigabit Ethernet cable. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of 30W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Input Voltage 24-72VDC
Passive POE Output voltage 24VDC
High Power 30W
Dual DC Inputs for connecting 2 power sources
Integrated POE Inserter
Low self consumption power
Short Circuit, Over Current and Over Voltage Protection
High Temperature Operation
36V to 72V Battery Systems
Wireless Access Points and Client Devices
IP Phone and Security Camera System